There are currently 12 users online
1698 visitors in the last 24 hours

noback.gif - 35.28 K
PO Box 716, Amherst, NH 03031-0716 USA


Updated  04/23/08

Privacy Statement
View Cart    MasterCard Payment AcceptedVisaPayment AcceptedCheck or Money Orders Accepted    Checkout
Shopping Cart Help
To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry

UV-F-355/1~3 mw

Laser Diode Pumped CW 355 nm Ultraviolet Lasers 1-3 milliwatts
All solid state 355 nm uv lasers feature ultra compact construction, long lifetime, low cost and are easy to operate. Lasers are used in DNA sequencing, flow cytometry, cell sorting, fluorescing materials, laser rapid modeling, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments etc.
UV, Ultraviolet Laser Systems UV, Ultraviolet Laser Systems
  • Wavelength (nm) 355
  • Output power (mW) 1-3 mw
  • FDA Classification Class 3a
  • Transverse mode near TEM00
  • Operating mode CW
  • Power stability (rms, over 4 hours) <10%
  • Warm up time (minutes) <15
  • M2 factor <2
  • Beam parameters ellipictal (4:1), Beam spot~2mm
  • Beam divergence, full angle (mrad) <1.5
  • Beam diameter at aperture (mm) ~3
  • Beam height from base (mm) 45
  • Spectral linewidth (nm) <0.1
  • Polarization ratio >50:1
  • Point Stability after warm up <.05
  • Operating temperature (C) 10-35
  • Expected lifetime (hours) 10,000
  • Laser head dimensions (mm) 211 L x 88 W x 74 H wgt 1.47kg
  • Power supply dimensions (mm) 238 L x 146 W x 94 H wgt 2.88 kg
  • Power supply 80-260 vac
  • Warranty time 1 year
Items highlighted in red are options.

MPL-F-355/1~50 mw

Laser Diode Pumped Pulsed Ultraviolet Lasers 1-50 milliwatts
All solid state 355 nm uv lasers feature ultra compact construction, long lifetime, low cost and are easy to operate. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments.
UV, Ultraviolet Laser Systems UV, Ultraviolet Laser Systems
  • Wavelength (nm) 355
  • Output power (mW) 1-80 mw
  • FDA Classification Class 3b
  • Transverse mode near TEM00
  • Operating mode Frequency conversion of Q switched pulsed lase
  • Single pulse energy .1-15uJ
  • Pulse duration (ns) ~10
  • Peak power (W) ~10
  • Rep rate (kHz)
    Controllable fixed and stable 1k,2k, 3k, 4k, 5k
    TTL input for ranges in between.
    Uncontrollable and undefined 5-7kHz suitable for
    applications requiring high power pulses.
  • Power stability (rms, over 4 hours) <10%, <5%
  • Warm up time (minutes) <15
  • Beam parameters ellipictal (4:1), Beam spot~2mm
  • Beam height from base (mm) 45
  • Polarization ratio >50:1
  • Point Stability after warm up <.05
  • Operating temperature (C) 10-35
  • Expected lifetime (hours) 10,000
  • Laser head dimensions (mm) 211 L x 88 W x 74 H wgt 1.47kg
  • Power supply dimensions (mm) 238 L x 146 W x 94 H wgt 2.88 kg
  • Power supply 80-260 vac
  • Warranty time 1 year
Items highlighted in red are options.

MPL-W-355/100~800 mw

Laser Diode Pumped Pulsed Ultraviolet Lasers 100-800 milliwatts
All solid state 355 nm uv lasers feature ultra compact construction, long lifetime, low cost and are easy to operate. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments.
UV, Ultraviolet Laser Systems UV, Ultraviolet Laser Systems
  • Wavelength (nm) 355
  • Output power (mW) 100-800 mw
  • FDA Classification Class 4
  • Transverse mode near TEM00
  • Operating mode Frequency conversion of Q switched pulsed lase
  • Single pulse energy 5-50uJ
  • Pulse duration (ns) ~15
  • Peak power (W) ~600
  • Rep rate (kHz)
    Undefined rep rate around 5k-20khz and unstable.
    Suitable for application only requiring high peak power pulses
  • Average power single pulse energy x rep rate
  • Power stability (rms, over 4 hours) <10%, <5%
  • Warm up time (minutes) <15
  • Beam parameters ellipictal (4:1), Beam spot~2mm
  • Beam height from base (mm) 93.5
  • Polarization ratio >100:1
  • Point Stability after warm up <.05
  • Operating temperature (C) 10-35
  • Expected lifetime (hours) 8,000
  • Laser head dimensions (mm) 333 L x 140 W x 125 H wgt 8kg
  • Power supply dimensions (mm) 307 L x 168 W x 123 H wgt 10 kg
  • Power supply 110 or 220 vac
  • Warranty time 1 year
Please note that because of the WALK ON EFFECT of non linear crystals, the beam quality is not as good as the 532 or 1064 devices.

Items highlighted in red are options.

MPL-F-266/1~4uJ

Laser Diode Pumped Pulsed Ultraviolet Lasers 1-50 milliwatts
All solid state 266 nm uv lasers feature ultra compact construction, long lifetime, low cost and are easy to operate. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments.
UV, Ultraviolet Laser Systems UV, Ultraviolet Laser Systems
  • Wavelength (nm) 266
  • Output power (mW) 1-20 mw
  • FDA Classification Class 3b
  • Transverse mode near TEM00
  • Operating mode Frequency conversion of Q switched pulsed lase
  • Single pulse energy .1-4uJ
  • Pulse duration (ns) ~10
  • Peak power (W) ~10
  • Rep rate (kHz)
    Controllable fixed and stable 1k,2k, 3k, 4k, 5k
    Stable pulse energy, peak duration and period
    1-5 kHz by external TTL signal
    Uncontrollable and undefined 5-7kHz suitable for
    applications requiring high power pulses
  • Power stability (rms, over 4 hours) <10%, <5%
  • Warm up time (minutes) <15
  • Beam parameters ellipictal (4:1), Beam spot~2mm
  • Beam height from base (mm) 45
  • Polarization ratio >50:1
  • Point Stability after warm up <.05
  • Operating temperature (C) 10-35
  • Expected lifetime (hours) 10,000
  • Laser head dimensions (mm) 211 L x 88 W x 74 H wgt 1.47kg
  • Power supply dimensions (mm) 238 L x 146 W x 94 H wgt 2.88 kg
  • Power supply 80-260 vac
  • Warranty time 1 year
Items highlighted in red are options.

MPL-W-266/50-200 mw

Laser Diode Pumped Pulsed Ultraviolet Lasers 50-200 milliwatts
All solid state 266 nm uv lasers feature ultra compact construction, long lifetime, low cost and are easy to operate. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments.
UV, Ultraviolet Laser Systems UV, Ultraviolet Laser Systems
  • Wavelength (nm) 266
  • Output power (mW) 50-200 mw
  • Transverse mode Near TEM00
  • Operating mode Frequency conversion of Q switched pulsed lase
  • Single pulse energy ~8
  • Pulse duration (ns) ~15
  • Peak power (W) ~450
  • Rep rate (kHz)
    Undefined rep rate around 5k-20khz and unstable. Suitable for
    application only requiring high peak power pulses
  • Average power single pulse energy x rep rate
  • Power stability (rms, over 4 hours) <10%, <5%
  • Warm up time (minutes) <15
  • Beam parameters ellipictal (4:1), Beam spot~2mm
  • Beam height from base (mm) 93.5
  • Polarization ratio >100:1
  • Point Stability after warm up <.05
  • Operating temperature (C) 10-35
  • Expected lifetime (hours) 8,000
  • Laser head dimensions (mm) 333 L x 140 W x 125 H wgt 8kg
  • Power supply dimensions (mm) 307 L x 168 W x 123 H wgt 10 kg
  • Power supply 110 or 220 vac
  • Warranty time 1 year
Please note that because of the WALK ON EFFECT of non linear crystals, the beam quality is not as good as the 532 or 1064 devices.

Items highlighted in red are options.

View CartCheckout
Inquiries: 603-673-4730 | Orders: 800-221-1705 | Fax: 603-672-5406 | Email Contact

noback.gif - 35.28 K
PO Box 716, Amherst, NH 03031-0716
USA 		Site Index