To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry
12VDC Powered
Transformers
Full Short and Open Circuit
Protection
Suitable for Battery Operation
These low cost high voltage inverters operate from a 12 volt battery for portable use or a wall adapter converter for normal 115 vac use. Virtually indestructible circuitry is open and short circuit protected and will with stand reasonable amounts of abuse. Output is end point grounded and is at a high frequency of 25 to 35 khz. The direct high frequency output easily powers two electrode neon displays such as place stands, small point of purchase displays, home neon, vehicles etc.. All models include appropriate input and output leads for easy terminations.
FIRETRON
1kv open circuit at 15 ma short circuit requiring 12 vdc at 500 ma. Fully potted enclosure 2- 3/8 x 7/8 x 1".
Wall Adapters for FIRETRON
NEONXUL
3Kv open circuit at 20 ma short circuit , requiring 12 vdc at 800 ma. Full metal enclosure
2-3/8 x 1- 1/2 x 1-1/8" with 3-3/16" mounting centers. UL approved unit with 18" output leads and 7" input leads.
Wall Adapter for NEONXUL
NEONX10ADJ
All new power supply for portable, solar or battery powered neon and gas tube displays. Operates any normal display up to 10 feet and allows complete dimming without pulling from the ends. Excellent for powering hand held plasma globe wands or similiar devices offering a wide adjustment of display textures.
Circuit design is virtually 99% efficient and is a real advantage for solar and battery power where every watt counts. Board level layout is 5 x 2" and is simple to use. 12" input and output leads with dimming control. Uses our #12DC/1.5 and draws 1.5 amps when operated at full output. Dimming control will reduce current to less than .1 amps and allow operating from solar cells or batteries.
Full range dimming and flashing. Includes 3 Way Switch. Input 9-12VDC. Output 2.5Kv@.1-15ma for 1-6' tube. 3.2 x 1.3"
Automotive Applications
High Reliability - Open and Short Circuit Protection
NEONXA
Versatile weatherproof driver for automotive or general outdoor use. Operates from an automotive 14 volt battery system and drives up to 10 feet of display. Output 4Kv@20ma. Unbalanced output greatly simplifies install since only one high voltage lead is required and can be only several inches long depending on driver location. The return lead usually coming from the far end need only be grounded to the auto frame or be a low voltage wire. 2.6 x 1.6".
RB4 Road Blitzer High Powered Automotive Applications
This transformer will power 8-35 feet of under car neon tubing. 9000 volts at 35 milliamps with safety fault shut down circuitry. Fully loaded unit will draw 7 amps at 12 to 14 volts DC. 5 x 2" with fully potted enclosure and heavy aluminum mounting bracket.
