HYDROL12V Hydrogen Pulsed Control Generator

• Operates from any fixed 12 to 20 volt dc power supplies listed below including automotive batteries for on board vehicle use.
  
• Produces output current pulses up to 10 amps
  
• Includes amp meter with all controls on front panel.
  
• BNC scope pulse monitoring output jack
  
• Includes four switch-able ranges of variable pulse frequencies from <1 to 75 Hz, 75Hz to 750Hz and 750Hz to 7500Hz and
  7500Hz to 75 kHz
  
• Duty cycle control of all pulse frequencies ranges from <10 to >90% “on to off” ratios now allows fine tuning to many different
  sizes and shapes of hydrolyzer cells. Duty cycle control reduces heat build up by reducing high average currents.
  
• Includes heavy duty banana jacks for input power and pulse output connections.
  
• Size 6 x 6 x 3”

HYDROL12V pulsed controller ready to use……………………………………………………….. $99.50

Power supplies for above controller are sold separately and listed below
12DC/7 Fixed 12volt dc 7amp regulated supply for medium volume production………………… $39.50
20DC/10ADJ 20volt dc 10 amps adjustable voltage output for higher volume..............$199.50

DIDRIV10 High Voltage High Frequency Duty Cycle Control Resonant Driver for
Hydrogen, Ozone, Corona Production and Other Electrochemical Applications

Please note that we can design a transformer to match your cell capacitance

"Important: This model is an advanced system intended for use by qualified personnel, familiar with driving resonant circuits. We do not offer refunds on this equipment. Please make sure you have any questions answered before purchasing this item"

• Independent voltage control from zero to maximum output of 20 kv pk-pk
• Independent current control from 5% to maximum output
• Independent frequency control from 20 to 50 khz
• Large 3 ammeter monitors AC line current. Indicates resonance peaking
• Adjustable wave form duty cycle function allowing a wide range of operation
• Adjustable safety shutdown circuit disables the circuit in case of over voltage
• Maximum output power over 200 watts
• Short circuit proof by built in leakage reactance
• 120vac 50/60 hz input..240 vac versions available with below auto step down
  transformer
• Measures 7 x 4 x 10 and weighs less than 5 pounds

Now at last a reliable and flexible power supply to effectively drive those light capacitive loads such as ozone and hydrogen cells.. Adjustable frequency allows the user to correctly tune his cell to the proper operating point thus providing the necessary resonant voltage rise. A panel meter indicates the proper 180 degree phase angle. Output power may be adjusted from 10 to 200 watts. Utility unit operates from standard 120 vac 60 hz and measures 7 x 4 x 10’’ and weighs less than 5 pounds. Intended for hydrogen production research, corona generation, energizing dielectric barrier junctions, ozone production and other electrochemical applications.

DIDRIV10 - Ready to use……………………………………………………….. $399.95
220V/250W - Optional 220 VOLT/50 HZ Step Down Auto Transformer With Euro Plug.....$59.95