PO Box 716, Amherst, NH 03031-0716 USA
| There are currently 13 users online |
| 1697 visitors in the last 24 hours |
|
PO Box 716, Amherst, NH 03031-0716 USA |
|
EMP/HERF
|
 
|
To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry |
EMP/HERF/Shock Pulse GeneratorsShock wave generators are capable of producing focused acoustic or electromagnetic energy that can break up objects such as kidney stones and other similar materials. EMP generators can produce pulses of electromagnetic energy that can destroy the sensitive electronics in computers and microprocessors. Destabilized LCR circuits can produce multi megawatt pulses by using an explosive wire disruptive switch. These high power pulses can be coupled into antennas, conic sections, horns etc for very directional effects. Research is currently being undertaken to disable vehicles thus avoiding dangerous high speed chases. The trick is to generate a high enough power pulse to fry the electronic control processor modules. This could be a lot simpler if the vehicle was covered in plastic or fiber glass rather than metal. The shielding of the metal body offers a challenge to the researcher to develop a practical system. A system could be built that could do this but would be costly, large and produce collateral damage to friendly targets.
Devices described are intended for
|
|
EMP1 - Plans/Data (By Download - $9.00) ..........$20.00
  |
| Low powered hand held pulse gun generates EMP electromagnetic pulses capable of de-programming and disrupting micro processor circuitry. Gun is built in a pistol configuration where the 8 "AA" batteries are housed in the butt section along with the push button trigger switch.
Directional device has adjustable pulse rate control and a built in emitter for close proximity applications. Specialized circuitry use our ultra low inductance high energy density capacitors with self triggering gap switch. Charging circuit uses our loss-less inductive charging and eliminates the losses associated with simple resistive methods. Pulse energy is approximately 1 Joule with a rep rate up to 30 pps. Charging voltage is over 5kv with a peak current of nearly 1000 amps now equal to a 5 megawatt pulse of power. Out put terminals may be adapted for a wave guide for more precise applications or connection to an external antenna where you can experiment with maximizing ÒEÓ or ÒMÓ field for certain applications. Unit can be built in a military gray PVC enclosure measuring 10 to 12 inches. *Assembled units are sold only to qualified personal who submit their order on a company letter head.
EMPGUN1 - Plans (By Download - $6.50) ........................$15.00
|
Our Emp Shock Wave Generators are Available to Qualified Researchers on a Rental Basis with Option to Buy
Contact Bob Iannini at: riannini@metro2000.net
EMP150 - 150 JOULE.........................$1000.00* /60 Days + Shipping
*Requires $8000.00 Security Deposit
EMP400 - 400 JOULE.........................$1500.00** /60 Days + Shipping
**Requires $14000.00 Security Deposit
We now have assembly schematics, instruction booklet, 20 colored photos of construction and other data for those wanting to build their model EMP400. This data is also intended for those who require additional data on this pulser.. Your cost for this informative data can be applied to the actual purchase.
EMP400INS - EMP400 Assembly Data and Instruction Booklet (By Download - $5.00) ..............$15.00
| Systems Come Crated With All Setup Instructions | ||||||||||
|
|
|||||||||
|
EMP150
- 150 Joules 15 KV 20 KA.....................................$CALL or EMAIL
EMP400 - 400 Joules 40 KV 45 KA.....................................$CALL or EMAIL Contact Us For Any Special Handling You May Require |
||||||||||
Parabolic Reflectors
PAREF12
- 305 mm d 75 mm f l...............$79.95
|
|
50 KV Current Charger10 to 50 KV capacitor charger with reactance current limiting. Adjustable short circuit current is charging current! Operates from 12 vdc at 5 amps for field use. Output current 100 ua to .5ma.
50KVCC1
- Plans.................................$10.00
|
|
Low Cost 100KV DC SupplyLow cost amateur experimenters source of HVDC for many applications
HVOLT1K - Kit/Plans...................$149.95 HVOLT10 - Assembled................$249.95 |
|
High quality and competively priced devices for military, nuclear sciences
high energy lasers, electronic weaponry, electromagnetic weapons
explosives and other professional research programs.
HV100KV
- 100Kv/5ma.......................$3300.00
|
 |
| Stackable Capacitors Intended For High Current Discharge With Voltage Multipliers | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cap in pfd | 20 kv sizes | Cost | 30 kv sizes | Cost | 40 kv sizes | Cost | 50 kv sizes | Cost |
| 500p | 75x40x40mm | $15 | 75x40x65mm | $20 | 140x60x65mm | $26 | 140x70x70mm | $38 |
| 1000p | 75x50x40mm | $26 | 75x50x65mm | $33 | 140x60x65mm | $42 | 140x70x70mm | $45 |
| 3300p | 100x70x40mm | $30 | 75x65x65mm | $39 | 140x75x65mm | $50 | 140x80x70mm | $53 |
| 6800p | 100x80x40mm | $50 | 100x75x65mm | $66 | 140x80x65mm | $83 | 180x90x70mm | $90 |
| 10,000p | 140x80x40mm | $69 | 100x75x65mm | $93 | 140x90x65mm | $105 | 18x10x7cm | $114 |
| 20,000p | 14x10x2cm | $81 | 14x7.5x6.5cm | $108 | 14x10x6.5cm | $128 | 18x13x7cm | $138 |
| 30,000p | 14x13x4cm | $93 | 14x11x6.5cm | $120 | 14x30x6.5cm | $138 | 18x15x7cm | $153 | Minimum Order 10 Each Value - Call For Shipping - Purchase Includes System Plans |
High Voltage Engineering Design Services |
High Voltage Design for Research, Trade, Education and Demonstration |
| We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc.. Our facilities are also available for designing and building action displays for museums and electrical demonstrations. | |
We Will Buy Your Used or Surplus High Voltage Equipment
|
|
|
You may contact us by
Email
or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
|
|
|
|
|
| |
|
PO Box 716, Amherst, NH 03031-0716 USA |
Site Index
|