| There are currently 12 users online |
| 1697 visitors in the last 24 hours |
PO Box 716, Amherst, NH 03031-0716 USA |
|
Capacitors for High Voltage Applications
|
To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry |
![]() |
![]() |
| Dual .0033 mfd 30 kv capacitors are internally connected for a voltage doubler circuit capable of 50 to 60 kv at up to 50 ma. Capacitor is potted and has three solderable connections for the mating diodes and external connections. 2.5 x 2 x 1.375".
.003M/30KVD ..............$74.95 |
![]() |
| STACKA - 12 stages 300 pfd at 12 kv 2.7 x .4..............$24.95
STACKB - 12 stages 350 pfd at 12 kv 2.2 x .4................POR STACKC - 12 stages 300 pfd at 10 kv 1.8 x .34..............POR STACKD - 12 stages 300 pfd at 10 kv 1.9 x .4 ...............POR Contact us for further volume discounts. |
![]() |
| These low cost ceramic capacitors are rated for 30 kv when operated under oil or encapsulated. They have radial leads spaced at .7 and can be operated at half their rated voltage in open air. | ![]() |
| 5500pfd 15000 vdc heavy duty ceramic capacitors with radial leads. Excellent for higher powered high voltage power supplys and multipliers. Disk capacitor is 1.1 d x .4 l with .8 lead spacing.
5500P/15KVDC.............................................$6.50 |
|
|
|
.001Mfd at 20Kv, .5 x .37", with .5" lead spacing, +80-20%
.001M/20KV..............$2.95 25-99 @ $2.25ea. 100-249 @ $1.95ea. 250-499 @ $1.50ea. 500-999 @ $1.20ea. 1000+ @ $.75ea. |
|
|
500Pfd at 10Kv, .35 x .25", with .45 lead spacing, +80-20%
500P/10KV - Ceramic Capacitor..............$1.50 25+.....$.75 |
|
|
270Pfd at 3Kv, .3 X .25", with .5" lead spacing, +80-20%
270P/3KV..............$.75 25+.....$.50 |
Contact us for further volume discounts.
![]() |
|
![]() |
Contact us for volume discounts.
![]() |
1200 mfd 400 volt - 100 joules in a cylinder 3 in diameter x 6 in length.
With screw terminals.
1200M/400V - Electrolytic Capacitor..............$24.95 |
![]() |
6000 mfd 250 volt - 200 joules in a cylinder 3 in diameter x 6 in length.
With screw terminals.
6000M/250V - Electrolytic Capacitor..............$34.95 |
![]() |
3300mfd 450 volt - 335 Joules in a 3 x 6 can with high current screw
terminations and 7/16 bottom mounting stud.
|
![]() |
4700mfd 450 volt - 475 Joules in a 3 x 6 can with high current screw
terminations and 7/16 bottom mounting stud. Epcos brand new and unused.
4700M/450V - Electrolytic Capacitor..............$49.95 |
![]() |
6300mfd 400 volt - 500 Joules in a 3 x 6 can with high current screw terminations.
Cornel Dubilier brand new and unused. 10 of these connected in parallel produce 5000
Joules...good for a portable rail or coil gun.
6300M/400V - Electrolytic Capacitor...............$44.95 |
![]() |
12000 mfd 400volt
- 960 Joules in a 3 x 9" can made by Epcos. High current terminations and easily combined for higher energies. Excellent for magnetizers, kinetic weapons etc.
12000M/400V - Electrolytic Capacitor...............$44.95 |
Stock values:
![]() | .005mfd at 10KVAC, 1-3/8" x 4-1/4" cylindrical
.005M/10KVAC - Tesla Coil Capacitor..............$59.95 |
![]() |
.02mfd at 10KVAC 2 3/8" x 7 ½" cylindrical
.02M/10KVAC - Tesla Coil Capacitor..............$229.95
.05mfd at 18KVAC 6 5/8" x 14 ½" cylindrical
.1mfd at 20KVAC 6 5/8" x 22" cylindrical
|
Ultra Low Inductance CapacitorAll new low ultra inductance high voltage specialized capacitors for EMP, Marx generators, voltage multipliers and other high voltage ultrafast discharge applications. Capacitors are cylindrically shaped and have 3/8 brass studs for connections to flat bar or other heavy conductors. Dimensions are 4 inches in diameter x 2 1/2 in length1M/5KVLOL - 1mfd @ 5kv 10 nh Capacitor ..........$119.95 |
![]() |
![]() |
.08 Mfd 100 Kv, 25 Kilo-amps, <20nano-henries. Capacitor measures 2.3" x 5.9" x 12.8" weighing only 7.5 pounds. A real beauty!!
.08M/100KV - New and Unused Maxwell/GA..............$990.00 |
|
.04mfd 50Kv, 20 kilo amp, 8 x 5 1/2 x 2 1/2"
.04M/50KV - Low Inductance Capacitor..............$POR |
![]() |
Scyllac Type
Here is the holy grail of high energy fast discharge capacitors. These large units are the dream components of many high voltage, high energy experimenters. Capacitor is rated 1.3 mfd at 100,000 volts at a 60,000 amp discharge capability. Ultra low inductance is excellent for shock pulsers, wire exploding, EMP generation, neutron generation, etc.. These capacitors are used but are guaranteed to output between 80 and 90% of their original ratings. Units measure 14 L X 11W X 25HX and weigh 220 pounds with ground ring terminations. Capacitors are strapped on pallets for shipping by truck. The original cost of these unit is $6700.00.
|
![]() |
10 mfd 2000 volt 20 Joules conservatively rated general purpose oil filled capacitor 7.5 x 4.5 x 2.75 including insulators. Excellent for moderately fast energy discharge. All new and unused with screw terminals. Easily connected in series, parallel or both for many high energy combinations. Brand new and unused with non pcb fill. Manufactured by NWL.
10M/2KV - Storage Capacitor........................................$49.95 |
![]() |
900 mfd 1100 volt 545 Joules
Excellent for those experimenting with rail, coil guns and other kinetic devices. Unit measures 6.5 x 6.5 x 6" h with high current screw terminations. These non polarized units can easily be combined in series parallel combinations for many specific applications.
900M/1100V - Energy Storage Capacitor..............$149.95 |
![]() |
32 Microfarad 4500 Volt Energy Storage Capacitor
Brand new and unused metal case capacitors are intended for use in many of our projects. Excellent for coil guns, wire exploding, can crushing, magnetizing and plasma generation. Conservatively rated at 4500 volts with a current rating of over 4000 amps on single event discharges. Connect three in parallel for 1000 joules at over 12000 amps discharge current. Rectangular size 10" x 4 ½" x 3 ½" with an energy storage density of >2 joules/cubic inch.
32M/4500V - Storage Capacitor..............$199.95 |
![]() |
24 Microfarad 5200 Volt Energy Storage Capacitor
Brand new but slightly used metal case capacitors are intended for use in many of our projects. Excellent for coil guns, wire exploding, can crushing, magnetizing and plasma generation. Conservatively rated at 5200 volts with a current rating of over 4000 amps on single event discharges. Connect three in parallel for 1000 joules at over 12000 amps discharge current. Rectangular size 9 " x 4 ½" x 2 Ύ" with an energy density of 2.8 joules/cubic inch.
24M/5200V - Storage Capacitor..............$149.95 |
| High Voltage DC Capacitors
|
Intended for high voltage DC power supplys for filtering and smoothing. Can also be used in voltage doubler circuits. These capacitors are for DC only and will not work in AC circuits.
.03M10KV - .03 mfd 10 kv in a 5 x 1 Cylinderical Tube..............$12.95
|
|
Physically Stackable Capacitors are intended for easy assembly of multipliers. .007mfd 20Kvdc, 4-3/4 x 2-1/4 x 1-7/8" .007/20KV..............$CALL |
High Energy Low Inductance Pulse Capacitors
For EMP, exploding wires, inertial confinement fusion experiments, plasma focus neutron sources, shock physics, high power gas discharge lasers, metal forming, seismic simulation, Marx generators, shock explosive substitution, linear accelerators.
|
High Voltage Direct Current Capacitors
For high voltage filtering, voltage multiplier circuits for Cockcroft Walton generators.
|
High Voltage High Frequency Capacitors
For Tesla high frequency generators and other RF
generators.
|
High Energy Storage Capacitors
Electro-kinetic devices, rail guns, flashlamps, ultra high magnetization, metal forming, spot welding, rock mining.
|
High Voltage Engineering Design Services |
High Voltage Design for Research, Trade, Education and Demonstration |
| We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc.. Our facilities are also available for designing and building action displays for museums and electrical demonstrations. | |
We Will Buy Your Used or Surplus High Voltage Equipment
|
|
|
You may contact us by
Email
or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
|
|
|
|
|
PO Box 716, Amherst, NH 03031-0716 USA |
Site Index
|